For sale:
Handmade Flashlight Mod with a 901, 801, or 510 connector

$35.00 shipped anywhere in the USA

4.5 Volts…..3 standard AAA batteries (700 mAh rechargeables are cheap at mass retailers)
OR
6 volts……2 Unprotected CR2 Batteries (please do your homework on using unprotected batteries as I will not be held responsible for injury or damage. Protected CR2s are a tad too long for the device)

Weight with AAA batteries 2 ounces
Weight with CR2 batteries 2.4 ounces
Total length with an atomizer & cartridge 5 ¾ inches
Diameter 1 inch
LED light lets you know everything is working properly
Connector is sealed for dripping
Solder used is lead-free and safe for vaping
Removable carry strap

Press flashlight power-on button located at base of body to power on the batteries. Press top side button to power the atomizer and vape away! When done, press the bottom button once more to turn off the batteries and avoid unnecessary drainage of batteries.





Please PM me with:
Your email address
Choice of color (blue, black, red, silver, camo)
Choice of LED light color (white, blue, green, red, uv black light…pink coming soon)
Atomizer connector (510, 801, or 901)

I will send a Payment Request via Amazon Payments to your email address and payment may be made using any credit or bank card, or your Amazon account.
When the mod is shipped, I’ll send package tracking number to your email address.

Orders will be built to order on a first come, first served basis, according to what we have in stock. Please allow about 2 weeks for shipment.

Sorry, atomizers & cartridges not included. For sale is the Flashlight Mod only.


http://i193.photobucket.com/albums/z48/misty_345/DSCF2886_edited.jpg

http://i193.photobucket.com/albums/z48/misty_345/DSCF2885_edited.jpg

These look great, and certainly a good price!

I haven't used a mod before (this seems like a good introduction). Do you notice a difference between the 4.5v and the 6v?

Absolutely there's a difference. At 4.5 volts, it hits closer to a standard 901 (or what have you) battery with a slightly harder throat hit (and without the expensive $9 batteries, of course)

6 volts hits pretty hard and the personally I think the flavors are little more pronounced. Anything more than 6 volts will fry the atty--trust me, I've tried!

Running at 6 volts was the only way my husband & I quit smoking. I played with different gadgets for months and I couldn't quit even at 5 volts. I was spending a fortune in 901 batts, and carried six with me at all times AND still smoking!

We were hoping to offer a cheaper solution to anyone wanting to try something at a higher voltage; the cheapest mod I've found so far is $80 shipped. I think it might be a more inexpensive way to simply try it out. If you don't like it, at least you're not out much.

FYI--Wal-Mart carries rechargeable AAA 4 packs fairly reasonable ($10 for Kodak brand at 700 mAh which should last a whole day for moderate vapers) and Raovac brand charger for $6.50

I found CR2s at Deal Extreme; 2 packs for around $3 with free shipping. eBay is a good place to shop for these if you're in a hurry

Which style battery do you prefer? AAA or the CR2s? Does one last longer than the other? I've never had a mod b4 and have been wanting to get one.

Burke - thank you. that was one of the most objective descriptions I've read about the voltage difference.

I personally prefer CR2s because they run at 3 volts each equaling 6 volts. It's a matter of personal preferance, actually. If you like a soft hit, AAA will do the trick and they're conveinent to get. If you need a beefer hit, the kind that makes you cough the first time (ha ha), 6 volts is the way to go. Everyone has their favorite I suppose.

How long a battery last depends on the mAh. The higher the number, the longer the batt will last on a single charge. Anything above 600 should be adequate, depending on how much you vape. I've had 1000 mAh batteries last 2 days on a single charge. Though after many, many, many recharges I get a half day out of the same batteries. And I vape CONSTANTLY

As far as the life of these rechargeables, most can be recharged 500 times with proper care. I cannot speak for the AAAs, the packaging doesn't mention anything about how many charges it will take. I can say though, I've had some Duracell AA batts in my digital camera & have charged them well over 500 times. Those batts have been through some rough stuff as well.

I also forgot to mention that with the flashlight mod, I'll be including a 3 AAA battery holder that simply slides into the casing and a small sleeve for the CR2s (they are bit skinny though the sleeve holds them tighly in place)

If you are interested, you can pick up AAA's about anywhere but the really generic, no-name ones are worthless---tried this already. If interested in CR2, Deal Extreme has the best prices that I've come across, though ships by Registered AirMail (will get to you in about a month) If you want to test out quickly, as I said before, you can find some USA sellers on eBay but you're going to pay quite a bit more. I've never even checked Radio Shack or Best Buy because I was sure I'd be freaked out by price.

Should anyone purchase one and still have questions once you receive it, you are more than welcome to email or PM me at anytime.

So just to clarify even further - the unit we receive will have everything needed to go 4.5v or 6v, we just will choose which type of battery to use as the end-user, right?

Absolutely correct. You get to choose everything yourself, case color, LED color, type of battery you'd like to use. It will come ready for whatever you prefer. All you need to provide is an atomizer and batteries and you're good to go

Well I'm sold! Thanks for all the info Burke. When I get some dough, I'll be ordering one:)

Same here - just have to see how the budget shapes up after payday this Friday.

Greetings Burke, Welcome to the Vapezone.

Question, are you having any issues with premature switch burnout (PSB)?

I have a Prodigy V1 and the switch has been replaced 3 times now due to the high amp draw. I am building 2 different mods right now (Parts just ordered) 1 with a volt regulator to drop two CR123a to 5 volts and one with a PTN04050(Charge Pump) and a single 18650 3000mA battery but using a MOSFET in both to switch them.
Want to go with a flashlight mod but getting all those parts in there will be a bit tight for this old man. Had to buy a visor type magnifier recently just so to be able to soldier the parts.
Next mod maybe.

So what is the switch amp rating on your mod?

Awesome! Thanks guys, be sure to let me know how it works for ya after you give a good trying out.

You both are more than welcome to let me know your color/style choices & we can get a jump on getting them made up, just PM me with info

Question, are you having any issues with premature switch burnout (PSB)?

I have a Prodigy V1 and the switch has been replaced 3 times now due to the high amp draw. I am building 2 different mods right now (Parts just ordered) 1 with a volt regulator to drop two CR123a to 5 volts and one with a PTN04050(Charge Pump) and a single 18650 3000mA battery but using a MOSFET in both to switch them.
Want to go with a flashlight mod but getting all those parts in there will be a bit tight for this old man. Had to buy a visor type magnifier recently just so to be able to soldier the parts.
Next mod maybe.

So what is the switch amp rating on your mod?


Oh wow! I'll have to talk to husband, Shawn about all that :-D
I'm more along the line of publc relations, computer stuff, research....things like that. He does all the building. electronic stuff. We're both working full time, husband also goes to night school 3 days a week. Soon as he has a free moment, I'll have him PM you.

--Misty

Prolly gonna be a few weeks for my order Misty, but you'll be the first to know:)

That's cool, take your time! :-D

Hey everyone...Besides Amazon Payments, I'm gonna do PayPal as well for those of you interested. Will send a PayPal Payment Request to your email address for payments, just let me know which you prefer.

I'm going to order two of these babies. Maybe give one away to someone who's new to vaping. Looks like a neat little mod. Can't wait to play with it.

I'm going to order two of these babies. Maybe give one away to someone who's new to vaping. Looks like a neat little mod. Can't wait to play with it.

Hey I'm new!:D:D:D:D:D

On another forum where I'm trying to advertise, they asked for pics of top & inside....I can't get a decent pic of inside so here's the top. They're also discussing different sized batteries that run at 3.6 volts, about the length of 2 CR2s. We haven't gotten any yet, but when the time comes, I'll annouce my findings on the long skinny batts.

http://i193.photobucket.com/albums/z48/misty_345/DSCF2889_edited.jpg

Yes please do, I am interested in the 18650,16xxx, ect. Can get up to 3000mA with the big boys.

Do you have any means (room) to add a dropping resistor to get it to 5 volts? (.5 ohms 1/2 watt)

Clean picture by the way. Nice close up. and a GREAT price for a mod like this.

Are these the right batteries?:

http://www.dealextreme.com/details.dx/sku.932

I'm going to be ordering one of your mods this time next week and want to make sure I'm getting the right batteries. I didn't see anywhere that said these were unprotected or protected.

Also I'm going to be ordering some 4075 attys, which as I understand, work with any 901. Do you know if there is any problem with these on your mod? Sorry for the 20 questions:)

The batteries are what I'm vaping with, and I haven't tried the 4075 atty's. I install a standard 901 battery connector on my mod. I haven't tried them so I cann't say with 100% yes they will work.

I have heard of VERY rare instances where a 4075 atomizer doesn't quite make enough of a connection with certain 901 batteries, but in general (and in my personal experience) they should be completely compatible with any 901 battery thread.

Cool. Worth the risk. Worst case I'll use my 901 atty's on the mod and the 4075 atty's for my regulars.

Make sure when you do go looking for batteries, check out Madvapes prices. Tom is a bit higher than DealExtreame but he generally beats even eBay.
And his shipping is stupid cheap.

Make sure when you do go looking for batteries, check out Madvapes prices. Tom is a bit higher than DealExtreame but he generally beats even eBay.
And his shipping is stupid cheap.

I checked em out but this is the only charger I found close to charging a CR2:

http://www.madvapes.com/AD-108-Lithium-Ion-Battery-Charger_p_2042.html

It says it charges a CR123. Is that close enough to the same size?

You really need a cr2 battery charger for the cr2s.

Found one on Dealextreme.com:

http://www.dealextreme.com/details.dx/sku.2031

Burke,
Good morning. I am interested in your MOD
are they still available?

Aidenzane

( VAPORNOOB)

DSE901 (first E-CIG)

Sending PM......

As for anyone else reading here, we have received many orders, much more than expected and as a result we have limited flashlight colors available at this time. We are however about to make an order of flashlights making available the color white, but I don't think we'll be able to get any more camo.

We are currently working on getting some different colors while maintaining orders as they come in.

We would like to thank everyone here for your interest and appreciate the generous comments we've received through email!
We sincerely appreciate everyone's business and support. Thanks to you guys, we've sold way more than we ever expected--wait to ship is about 3 weeks now and I apologize for the extra week but popularity speaks for itself.

Thanks again,
Shawn & Misty

sounds like things are going well I'm glad to hear it

Hello everyone. We’ve made a slight change in the way we will be selling the flashlights. While we’d like to thank everyone for their continued interest in our gadget, there just doesn’t seem to be enough time in the day! We do have a lot going on here and it’s getting increasingly difficult to keep up with custom orders and get them out within two or three weeks.


Instead of made to order, on demand, we will be making flashlights and selling them in batches. For example, a handful of black flashlights with 901 connector will be available until they sell out. Once we have a handful of say, red flashlights with 801 connectors made up, they will be made available until they sell out, etc.

We am sorry to do this, but on the upside, once you place an order, there will be no need to wait for it to be made. Once payment is received, your flashlight will be in the mail the very next business day.

And so on and so forth. I’ll create a new posting for each item as they are made with quantities available. It will also be on a first come, first served basis. However, please do not PM me asking for me to hold one of this or that as I am not yet ready to begin waiting lists. Building of the flashlights has not even begun and it may be a bit before we have some ready.

Once I have posted a certain color and type, you may PM me with your info.

Many thanks to everyone!!

--Misty